Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for Valve Jacket , Liquid Nitrogen Container 1.5 Ltr , Lng Valve , Welcome to visit us at any time for business relationship established.
Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy Detail:

Product Application

The product series of Phase Separator, Vacuum Pipe, Vacuum Hose and Vacuum Valve in HL Cryogenic Equipment Company, which passed through a series of extremely strict technical treatments, are used for transferring of liquid oxygen, liquid nitrogen, liquid argon, liquid hydrogen, liquid helium, LEG and LNG, and these products are serviced for cryogenic equipment (e.g. cryogenic storage tank, dewar and coldbox etc.) in industries of air separation, gases, aviation, electronics, superconductor, chips, pharmacy, biobank, food & beverage, automation assembly, chemical engineering, iron & steel, rubber, new material manufacturing and scientific research etc.

Vacuum Insulated Phase Separator

The Vacuum Insulated Phase Separator, namely Vapor Vent, is one of the most common equipment of Vacuum Insulated Cryogenic Piping System. The phase separator is mainly to separate the gas from the cryogenic liquid, which can ensure,

1. Liquid supply volume and speed: eliminate insufficient liquid flow and velocity caused by gas barrier.

2. Incoming temperature of terminal equipment: eliminate the temperature instability of cryogenic liquid due to slag inclusion in gas, which leads to the production conditions of terminal equipment.

3. Pressure adjustment (reducing) and stability: eliminate the pressure fluctuation caused by the continuous formation of gas.

The Phase Separator is a mechanical structure and system that does not require pneumatic and electrical source. Usually choose 304 stainless steel production, can also choose other 300 series stainless steel according to the requirements. The Phase Separator is mainly used for liquid nitrogen service and recommended to be placed at the highest point of the piping system to ensure maximum effect, since gas has a lower specific gravity than liquid.

There are three type of separators to satisfy various demands,

1.HLSP1000 series, a common phase separator.

2.HLSR1000 series, a pressure step-down regulating phase separator and suitable for some special control requirements.

3.HLSC1000 series, a special phase separator uses for Molecular Beam Epitaxy (MBE) System.

About the Phase Separator / Vapor Vent more personalized and detailed questions, please contact HL Cryogenic Equipment directly, we will serve you whole-heartedly!

Parameter Information

Name Phase Separator
Model HLSP1000
Pressure Regulation No
Design Pressure ≤40bar (4.0MPa)
Design Temperature -196℃~ 60℃
Insulation Type Vacuum Insulation
Effective Volume 10L
Material 300 Series Stainless Steel
Medium Liquid Nitrogen
Description
  1. The phase separator is recommended to place in the main line of the VJ Piping System, which has better exhaust capacity than branch lines.
  2. It has a large capacity and can act as a buffer tank, and better meet for the equipment which needs instantaneous large amount of liquid.
  3. Compared with small volume, HL’s phase separator has better insulated effect and more rapid and sufficient exhaust effect.
  4. No power supply, no manual control.
  5. It can be customized according to the special requirements of users.

 

Name Pressure Regulating Phase Separator
Model HLSR1000
Pressure Regulation Yes
Design Pressure ≤40bar (4.0MPa)
Design Temperature -196℃~ 60℃
Insulation Type Vacuum Insulation
Effective Volume 10L
Material 300 Series Stainless Steel
Medium Liquid Nitrogen
Description
  1. The phase separator is recommended to place in the main line of the VJ Piping System, which has better exhaust capacity than branch lines.
  2. It has a large capacity and can act as a buffer tank, and better meet for the equipment which needs instantaneous large amount of liquid.
  3. Compared with small volume, HL’s phase separator has better insulated effect and more rapid and sufficient exhaust effect.
  4. Automatically, without power supply and manual control.
  5. It can be customized according to the special requirements of users.

 

Name Special Phase Separator for MBE Equipment
Model HLSC1000
Pressure Regulation No
Design Pressure Determine according to MBE Equipment
Design Temperature -196℃~ 60℃
Insulation Type Vacuum Insulation
Effective Volume Determine according to MBE Equipment
Material 300 Series Stainless Steel
Medium Liquid Nitrogen
Description A Special Phase Separator for MBE equipment with Multiple Cryogenic Liquid Inlet and Outlet with automatic control function meets the requirement of gas emission, recycled liquid nitrogen and temperature of liquid nitrogen.

 

  1. The phase separator is recommended to place in the main line of the VJ Piping System, which has better exhaust capacity than branch lines.
  2. It has a large capacity and can act as a buffer tank, and better meet for the equipment which needs instantaneous large amount of liquid.
  3. Compared with small volume, HL’s phase separator has better insulated effect and more rapid and sufficient exhaust effect.
  4. Automatically, without power supply and manual control.
  5. It can be customized according to the special requirements of users.

Product detail pictures:

Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy detail pictures

Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy detail pictures

Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy detail pictures

Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy detail pictures

Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy detail pictures

Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy detail pictures

Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy detail pictures


Related Product Guide:

To consistently enhance the management method by virtue of the rule of "sincerely, fantastic religion and top quality are the base of business development", we extensively absorb the essence of associated goods internationally, and constantly acquire new merchandise to satisfy the needs of shoppers for Factory making Dewar Flask - Vacuum Insulated Phase Separator Series – Holy , The product will supply to all over the world, such as: Anguilla, Jamaica, Netherlands, We confirm to public, cooperation, win-win situation as our principle, adhere to the philosophy of make a living by quality, keep developing by honesty , sincerely hope to build up a good relationship with more and more customers and friends, to achieve a win-win situation and common prosperity.
  • Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
    5 Stars By Hedy from Bahrain - 2018.06.12 16:22
    The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Louise from Nigeria - 2017.06.16 18:23

    Leave Your Message