High Quality Nitrogen Vapor Vent - Vacuum Insulated Phase Separator Series – Holy

Short Description:

Product Detail

Product Tags

Feedback (2)

We keep on with the basic principle of "quality to start with, support very first, continuous improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the quality objective. To great our service, we offer the items with all the superior top quality at the reasonable selling price for Contractor Vacuum , Liquid Oxygen , Cryogenic Liquid Nitrogen , At our firm with good quality initially as our motto, we manufacture merchandise that are entirely made in Japan, from materials procurement to processing. This enables them for being used with confident peace of mind.

High Quality Nitrogen Vapor Vent - Vacuum Insulated Phase Separator Series – Holy Detail:

Product Application

The product series of Phase Separator, Vacuum Pipe, Vacuum Hose and Vacuum Valve in HL Cryogenic Equipment Company, which passed through a series of extremely strict technical treatments, are used for transferring of liquid oxygen, liquid nitrogen, liquid argon, liquid hydrogen, liquid helium, LEG and LNG, and these products are serviced for cryogenic equipment (e.g. cryogenic storage tank, dewar and coldbox etc.) in industries of air separation, gases, aviation, electronics, superconductor, chips, pharmacy, biobank, food & beverage, automation assembly, chemical engineering, iron & steel, rubber, new material manufacturing and scientific research etc.

Vacuum Insulated Phase Separator

The Vacuum Insulated Phase Separator, namely Vapor Vent, is one of the most common equipment of Vacuum Insulated Cryogenic Piping System. The phase separator is mainly to separate the gas from the cryogenic liquid, which can ensure,

1. Liquid supply volume and speed： eliminate insufficient liquid flow and velocity caused by gas barrier.

2. Incoming temperature of terminal equipment: eliminate the temperature instability of cryogenic liquid due to slag inclusion in gas, which leads to the production conditions of terminal equipment.

3. Pressure adjustment (reducing) and stability: eliminate the pressure fluctuation caused by the continuous formation of gas.

The Phase Separator is a mechanical structure and system that does not require pneumatic and electrical source. Usually choose 304 stainless steel production, can also choose other 300 series stainless steel according to the requirements. The Phase Separator is mainly used for liquid nitrogen service and recommended to be placed at the highest point of the piping system to ensure maximum effect, since gas has a lower specific gravity than liquid.

There are three type of separators to satisfy various demands,

1.HLSP1000 series, a common phase separator.

2.HLSR1000 series, a pressure step-down regulating phase separator and suitable for some special control requirements.

3.HLSC1000 series, a special phase separator uses for Molecular Beam Epitaxy (MBE) System.

About the Phase Separator / Vapor Vent more personalized and detailed questions, please contact HL Cryogenic Equipment directly, we will serve you whole-heartedly!

Parameter Information

Name	Phase Separator
Model	HLSP1000
Pressure Regulation	No
Design Pressure	≤40bar (4.0MPa)
Design Temperature	-196℃~ 60℃
Insulation Type	Vacuum Insulation
Effective Volume	10L
Material	300 Series Stainless Steel
Medium	Liquid Nitrogen
Description	The phase separator is recommended to place in the main line of the VJ Piping System, which has better exhaust capacity than branch lines. It has a large capacity and can act as a buffer tank, and better meet for the equipment which needs instantaneous large amount of liquid. Compared with small volume, HL’s phase separator has better insulated effect and more rapid and sufficient exhaust effect. No power supply, no manual control. It can be customized according to the special requirements of users.

Name	Pressure Regulating Phase Separator
Model	HLSR1000
Pressure Regulation	Yes
Design Pressure	≤40bar (4.0MPa)
Design Temperature	-196℃~ 60℃
Insulation Type	Vacuum Insulation
Effective Volume	10L
Material	300 Series Stainless Steel
Medium	Liquid Nitrogen
Description	The phase separator is recommended to place in the main line of the VJ Piping System, which has better exhaust capacity than branch lines. It has a large capacity and can act as a buffer tank, and better meet for the equipment which needs instantaneous large amount of liquid. Compared with small volume, HL’s phase separator has better insulated effect and more rapid and sufficient exhaust effect. Automatically, without power supply and manual control. It can be customized according to the special requirements of users.

Name	Special Phase Separator for MBE Equipment
Model	HLSC1000
Pressure Regulation	No
Design Pressure	Determine according to MBE Equipment
Design Temperature	-196℃~ 60℃
Insulation Type	Vacuum Insulation
Effective Volume	Determine according to MBE Equipment
Material	300 Series Stainless Steel
Medium	Liquid Nitrogen
Description	A Special Phase Separator for MBE equipment with Multiple Cryogenic Liquid Inlet and Outlet with automatic control function meets the requirement of gas emission, recycled liquid nitrogen and temperature of liquid nitrogen. The phase separator is recommended to place in the main line of the VJ Piping System, which has better exhaust capacity than branch lines. It has a large capacity and can act as a buffer tank, and better meet for the equipment which needs instantaneous large amount of liquid. Compared with small volume, HL’s phase separator has better insulated effect and more rapid and sufficient exhaust effect. Automatically, without power supply and manual control. It can be customized according to the special requirements of users.